Vibdaq is a portable 2-channel input IEPE/voltage, 2-channel voltage output signal acquisition box with USB interface.

It has 2,4mA/20V supplies for sensors with integrated amplifiers.

For low level signal amplification it features three selectable gain ranges and individually selectable highpass and lowpassfilters for both channels.

Indicator for sensors condition and signal overload further minimize the risk of handling errors. Device is powered form USB connector.

It is also possible to control all settings via PC using thesame USB interface and special driver.

The Vibdaq has a durable aluminium housing and membrane keypad withstanding dust and moisture.

The low noise, wide dynamic range and excellent accuracy make the Vibdaq an excellent choice for demanding measurement application.

Input/output channels - 2/2
Input type - IEPE 2,4mA/20V witch improved setting characteristics
Indicator for input open and short overload per channel
Input impedance - 100kOhm AC-po?a;czony
Output interface - USB 1.1
Input gain - 1,10,100 (0 dB, 20 dB, 40 dB)
SNR > 90 dB (10Hz-22kHz)
DISORTION < 0,1 %
Gain error < 0,5%
Gain drift < 50 ppm/oC
Output range - 15Vpp
Filters - 12 dB/oct, individually selectable on/off
High pass filter - 10 Hz or custom
Low pass filter - 1 kHz or custom
Power - from USB
Control interface - USB
Housing extruded aluminium with dirt and moisture repelling membrane keypad
Dimensions - 196mm X 110mm X 45 mm